| 抛光电机功率 | 1.5KW |
|---|---|
| 传动电机 | 0.55KW |
| 加工速度 | 3M/分钟 |
| 产地 | 广东 |
| 成型周期 | 15秒 |
| 传动方式 | 电动 |
| 激振频率 | 50次/分 |
| 类型 | 石材机械 |
| 外形尺寸 | 3500*1500*1300 |
| 压力 | 8KN |
| 用途 | 建筑工地 |
| 振动频率 | 60hz |
| 整机重量 | 2t |
| 直径 | 1.6m |
| 装机容量 | 11KW |
| 总功率 | 11KW |
| 主振形式 | 台振 |
| 成型压力 | 1吨 |
| 品牌 | 石创 |
| 型号 | XC-10头 |
| 加工定制 | 是 |
石英石后挡水设备 QUARTZ STONE PROCESSING EQUIPMENT
本设备结合市场上各类型号后挡水设备优点，改进设计而成。功能齐全操作方便、运行平衡、无振动、噪音低等优点，投放市场后得到到各厂家的一致好评。该机可对后挡水条进行弧面或45度斜面进行加工，加工的后挡水条质量十分好。后挡水条连抛带磨一分钟一米，加工出来的r角光亮度可达到90°以上，可任意调r角弧度，加工成本极低。用于厨房台面工程效果更佳、更显著。主要功能:修边、磨圆弧、倒角、抛光等功能。
The Equipment Combined With The Advantages OfDifferent Types On The Market After Improvement And Design. Full Function, EasyOperation, Balanced Running, No Shaking And Low Noise. Has Been Put On TheMarket, All The Manufacturers Speak Highly Of It. The Machine Can Be Used For ProcessingCambered Surface And 45 Degrees Cant. The Processing Quality Is Perfect. TheMachine Grinding a Meter Per Minute While Polishing. The Light Of R Angle CanReach More Than 90 Degrees After Polishing. You Can Adjust R Angle ArcArbitrarily. Also, The Processing Cost Is Extremely Low. It Is Better AppliedIn Kitchen Table And More Significant. Main Functions: Trimming, CircularArc,Chamfering, Polishing Etc.
MAIN TECHNICAL PARAMETER 主要技术参数：
| TRIMMING 修边 | 1PC/2.2KW | CHAMFERING 倒角 | 1PC/2.2KW |
| WORKING THICKNESS 工作厚度 | 6~30MM | WORKING SPEED 工作速度 | 0.4~1.5M/MIN |
| WORKING WIDTH 工作宽度 | 30~650MM | TRANSMISSION MOTOR 传动电机 | 0.55KW |
| TOTAL POWER 总功率 | 10.85KW | EQUIPMENT DIMENSION 设备尺寸 | 3500*1900*1500MM |
