GROUND / JUMPER ASSEMBLY TESTER
• This tester is designed to test in-service grounding and jumpering cable assemblies
• Regular periodic use will ensure that jumper assemblies perform as designed for personnel safety
• Tester is completely self contained, portable and sets up in seconds. Any standard 120 volt grounded
outlet will provide power to the tester.
• A reference chart is provided for #2, 1/0, 2/0, and 4/0 Str. Cu. cables of specific lengths to determine
correct test values
• A built in digital meter allows the operator to easily bbbbb the correct voltage specified on the refer-
ence chart for various sizes and lengths of cable
• A built in digital ammeter tells the operator if the assembly is in good working condition
• Test electrodes are available to fit a variety of grounding equipment including elbows, grounding
bushings, and ball socket clamps
• Maximum voltage output is limited to protect the operator
• Pressure sensitive inspection labels are available to tag cables after testing
![2013072551486469[1]](https://www.zi-maoqu.com/file/upload/202205/09/185143251.jpg)
| CAT NO | DEscriptION | LBS |
| 7714 | GROUND/JUMPER TESTER COMPLETE WITH STANDARD ELECTRODE | 36.0 |
| P31347 | STANDARD TEST ELECTRODE | 1.0 |
| A30367 | GROUNDING ELBOW TEST ELECTRODE | 0.8 |
| A30368 | GROUNDED PARKING STAND TEST ELECTRODE | 0.5 |
| P31340 | TEST ELECTRODE FOR 1 INCH BALL SOCKET DESIGN GROUND CLAMP ASSEMBLY | 0.7 |
| A30387 | TEST ELECTRODE FOR 20 mm BALL SOCKET DESIGN GROUND CLAMP ASSEMBLY | 0.8 |
| A30366 | TEST ELECTRODE FOR URD GROUND CLAMP A10015 ASSEMBLY | 0.9 |
| P15099 | PRESSURE SENSITIVE INSPECTION LABELS - QTY 16 ON PEEL OFF CARD | 0.1 |