HOT LINE INDICATOR
• Designed for both distribution and transmission use
• Both models verify line conditions/voltage prior to use with an audible signal plus flashing lights
• The audible signal is 90 decibels, and banks of red lights flash intermittently to warn the operator of
voltage potential
• Both units incorporate a single push button on-switch that is timer oriented and will automatically
shut the unit off after a period of inactivity
• Each time the Hot Line Indicator is turned on, each model will run through a pre-programmed test
cycle and a green pilot light will remain on, indicating the unit is operating properly
• The distribution model 6701 includes a wide range of pre-set voltage levels (600V, 2000V, 7000V,
11000V), which assist the operator in determining whether full line voltage or a lesser voltage is
present
• The transmission model is for voltage ranges from 69KV to 500KV
• Both units include 2” diameter hook for contacting conductor and switch gear. Each unit comes with
a universal fitting and must be attached to an approved hot stick or hot line tool before use.
• Includes carrying case
• Operates on 9-volt battery - also included
• Bushing adapters available for 6701. For URD applications.
![2013072555375981[1]](https://www.zi-maoqu.com/file/upload/202205/09/185144361.jpg)
| CAT NO | DEscriptION | LBS |
| 6701 | 0-46KV HOT LINE INDICATOR COMPLETE WITH CARRYING CASE, BATTERY, ConDUCTOR HOOK, OPERATING INSTRUCTIONS AND SAFETY GUIDE | 3.7 |
| 6701-1 | SAME AS 6701 EXCEPT WITH A LARGER STORAGE CASE FOR STORING BUSHING ADAPTERS | 4.2 |
| 266 | BUSHING ADAPTER FOR 15KV AND 25KV LOADBREAK BUSHING ALSO ADAPTS TO ELASTIMOLD 35KV BUSHINGS | 1.5 |
| 267 | RTE 35KV BUSHING ADAPTER | 1.8 |
| 6780 | 69-500KV TRANSMISSION HOT LINE INDICATOR | 3.7 |