This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.
| Electrical insulation | Safety | IEC 60664-1 / IEC 60664-3 |
| Maximum assigned service voltage | 720 V | |
| Assigned impulse voltage / pollution | 3 kV / III | |
| Measurement circuit | Assigned transformation ratio, Kn | 30 / 0.06 A |
| Measurement accuracy | 10%...15% | |
| Direct thermal current | 60 A | |
| Thermal short-circuit current, Ith | 1.8 kA / 1 sec | |
| Dynamic current, Idyn | 2.5 Ith | |
| Operating conditions | Type | Optoisolated voltage-free |
| Max. activation current | 50 mA | |
| Insulation | 1,500 V | |
| Mechanical features | Terminal protection | IP 20 (IEC 60529) |
| Screw-in fasteners | M-5 | |
| DIN rail (with accessory) | See code | |
| Housing material / colour | Lexan 923 / RAL 7035 | |
| Self-extinguishing class | UL94 V0 | |
| Product standards | IEC 60044-1 | |
| Connection | Two wire (S1-S2) connection type | Screw-in terminal (pzl screw) |
| Dimensions of rigid/flexible conductors | 0.1...2.5 mm2 / 27...12 AWG | |
| Connection to protection andmeasurement devices (RCD, RCM) | Cabling with wire section ≥ 1 mm2 | 0...1 m |
| Cabling with braided and shielded wire section ≥ 1 mm2 | 0...10 m |
| Net section (mm) | Weight (g) | In (A) | Type | Code |
| 20 Ø | 76 | s / relay | WGS-20* | P10131 |
| 20 Ø | 81 | s / relay | WGC-20-SC | P10181 |
| 25 Ø | 80 | s / relay | WGC 25 | P10151 |
| 30 Ø | 95 | s / relay | WGS-30* | P10132 |
| 30 Ø | 100 | s / relay | WGC-30-SC | P10182 |
| 35 Ø | 120 | s / relay | WGC 35 | P10152 |
| 55 Ø | 160 | s / relay | WGC 55 | P10153 |
| 80 Ø | 300 | s / relay | WGC 80 | P10154 |
| 110 Ø | 420 | s / relay | WGC 110 | P10155 |
| 140 Ø | 760 | s / relay | WGC 140 | P10156 |
| 180 Ø | 1480 | s / relay | WGC 180 | P10157 |
| 220 x 105 | 3740 | s / relay | WGC-220x105 | P10158 |
| 350 x 150 | 7800 | s / relay | WGC-350x150 | P10159 |
| 500 x 200 | 11300 | s / relay | WGC-500x200 | P10160 |
| Accessory for assembly on DIN rail (for WGC-20- SC, WGC-25, WGC-30-SC, WGC-35 & WGC-55) | - | - | PA-TC/WG | P19921 |
18017660909